How to deal with and avoid bending of aluminium profile parts during processing?

aluminum extrusion straightening: Straightening is a very serious bending process for profiles. Straightening workers must pay attention to the strength used for straightening. Excessive force may cause deformation of profiles, closure, orange peel, etc., and too little force may cause profile straightening and bending.

Aluminum Profile extrusion frame: This link is also very important. After the length of the rule has been sawed, the frame should be assembled. The fashion frame worker should pay attention to: is this material large or small, with pipe or flat die pulled out?

Because the Aluminium Profile is extruded in one-off process, the number of moulds is reduced and the process defects are effectively avoided.

The hardness of aluminium profiles is allowed to reach above 13 of pliers type hardness, while that of aluminium profiles in strip threading process is allowed to be around 10 of pliers type hardness. The heat-insulating aluminium profiles by injection glue are solidified once into the heat-insulating groove of aluminium profiles to form a heat-insulating bridge. Due to the high adhesion of the casting glue, the heat-insulating bridge and aluminium profile are fully bonded together, so the heat-insulating aluminium profile by this process has a high strength.

1. The application scope of aluminium profiles spare parts is divided according to their main uses. Aluminum Profiles refer to all kinds of aluminium profiles except aluminium profiles for door and window, curtain wall, interior and exterior design and construction.

2. Aluminum alloy profiles for aerospace are used to make aircraft skin, shell frame structure, girders, rotors, aircraft propellers, fuel tanks, wall panels and landing gear struts, rocket forging rings, spacecraft wall panels, etc.

3. aluminum profiles for transportation industry can provide various kinds of aluminum alloy materials for automobiles, subways and light rail stations to fill the internal blanks, which satisfies the requirements of Metro industrialization and can be used to manufacture vehicle, subway vehicle, railway line passenger vehicle, ground body structure parts of speed passenger vehicle, window doors and cargo greetings, car engine accessories, air conditioner, heat pipe radiator, body panels, wheel hubs and ship materials.

4. Aluminum profiles are mainly made of cans, caps, bottles, drums and packaging foils in the form of sheets and foils. It is widely used in packaging of beverages, food, cosmetics, pharmaceuticals, industrial products, etc.

5. The deep-drawing characteristics of aluminium foil for air conditioner are of high quality, high strength and good ductility, reaching the level of imported similar products. Performance electrolytic capacitor foil fills in internal blanks.